Page

47

9) MIDI CHANNEL

This function is used to determine on which MIDI channel the EP3 digital piano will exchange MIDI information with external MIDI devices and instruments.

￿Step 1

Press and hold the TOUCH and TRANSPOSE buttons, then press the HARPSI/MALLETS button.

 

 

The LED indicators for the TOUCH, TRANSPOSE, and HARPSI/MALLETS

 

 

buttons will start to flash, indicating that the MIDI Channel function has been

2

1

selected.

 

Press the HARPSI/MALLETS button

Press and hold both buttons

The name of the function ‘Chn’ (Channel) and the current settings will be shown in the LED display.

￿Step 2

Press the ￿or ￿VALUE/BALANCE buttons to select the desired MIDI channel.

MIDI CHANNEL

The MIDI Channel can be set within the range of 1 to 16.

￿Step 3

Press the TOUCH or TRANSPOSE button to exit MIDI Channel mode.

The LED indicators for the TOUCH, TRANSPOSE, and HARPSI/MALLETS buttons will stop flashing.

￿By default, the EP3 digital piano will receive MIDI information from all channels, 1 to 16. This state is called ‘omni mode on’. The EP3 digital piano will switch to ‘omni mode off’ when a specific channel is selected using the above MIDI Channel function, and data will only be received on that specified channel. In order to specify channel 1 in the ‘omni mode off’ state, first select channel 2, then select channel 1.

￿It is possible to use the Memory Backup function to store the preferred MIDI Channel setting. Please refer to the instructions on page 56 for more information.

FUNCTION SETTINGS

4

Page 47
Image 47
Kawai EP3 manual Midi Channel