Page
22
2 | THE PIANO |
| PLAYING |
6) REVERB, EFFECTS, AND EQ
The EP3 digital piano allows performers to alter sounds by adding reverb, applying effects, and adjusting equalisation (EQ).
When selecting some internal sounds, the LED indicator for the EFFECTS or REVERB buttons may turn on automatically. This is because certain internal sounds are prepared with an effect enabled as the default setting, enhancing tonal quality and improving acoustic realism.
REVERB
Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert hall. There are five types of reverb available:
Reverb type | Description |
Room 1 | Simulates the ambiance of a living room or small rehearsal room. |
Room 2 | Simulates a larger room than Room 1. |
Stage | Simulates the ambiance of a small hall or live stage. |
Hall 1 | Simulates the ambiance of a concert hall or theatre. |
Hall 2 | Simulates a larger hall or theatre than Hall 1. |
Step 1
Press and hold the REVERB button, then press the or VALUE/BALANCE buttons to select the desired reverb type.
2 |
| 1 |
|
|
| Press and hold the button |
|
| |
Room 1 | Room 2 | Stage | Hall 1 | Hall 2 |
The currently selected reverb type will be shown in the LED display.
Step 2
Press the REVERB button again to deactivate the reverb simulation.
The LED indicator for the REVERB button will turn off, indicating that the reverb simulation has been deactivated.
Pressing the REVERB button once again will reactivate the reverb simulation, recalling the previously selected reverb type.
Reverb settings are specific to each individual sound.
Any changes made to the reverb type or on/off status will remain until the power is turned off.
When the power is turned off, the reverb settings will return to the default settings, however it is possible to use the Memory Backup function to store the preferred reverb on/off setting. Please refer to the instructions on page 56 for more information.
