Page
32
Step 2
Release the REC button.
The LED indicators for the selected PIANO and BASS buttons will stop flashing, and the LED indicator for the REC button will start to flash. This is the standby state for recording.
3 RECORDER SONG
The LED indicator for the SOUND SELECTION button will also turn on, indicating that the sound to be used for recording can be changed.
Step 3
Play the piano.
The recorder will automatically start recording with the first key played.
The LED indicators for the PLAY/STOP and REC buttons will turn on.
Any changes made to the sound while recording will also be recorded.
While recording PART2, the previously recorded PART1 will also be played.
The recording can also be started by pressing the PLAY/STOP button instead of pressing a key, allowing PART2 to be recorded later in the song.
Step 4
Press the PLAY/STOP button to finish recording.
The LED indicators for the REC and PLAY/STOP buttons will turn off.
Saving may take a few moments. During this time, the EP3 digital piano will not respond to any other operations.
The total recording capacity of the EP3 piano’s memory is approximately 15,000 notes, with button and pedal presses also counted as one note. When the maximum capacity is reached, recording will stop and all music recorded up until that point will be saved to memory automatically.
