Page
51
When transmit program change is set to ‘Off’, program change and other panel information will NOT be transmitted via MIDI.
When transmit program change is set to ‘On’, the following MIDI exclusive data will be transmitted:
• Reverb settings (On/Off, type) | • Dual mode settings |
• Tuning setting | • |
• Transmit program change number On/Off | • |
• Touch curve setting | • Key of Temperament setting |
Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the EFFECTS button.
2 | 1 |
Press the EFFECTS button | Press and hold both buttons |
The LED indicators for the TOUCH, TRANSPOSE, and EFFECTS buttons will start to flash, indicating that the Transmit Program Change On/Off function has been selected.
The name of the function ‘PGM’ (Program) and the current settings will be shown in the LED display.
Step 2
Press the or VALUE/BALANCE buttons to select the desired Transmit Program Change setting.
TRANSMIT PROGRAM CHANGE
OffOn
When transmit program change is set to ‘Off’, program change and other panel information will not be transmitted via MIDI.
When transmit program change is set to ‘On’, program change and other panel information will be transmitted via MIDI.
Step 3
Press the TOUCH or TRANSPOSE button to exit Transmit Program Change On/Off setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and EFFECTS buttons will stop flashing.
When using DUAL or SPLIT mode, On/Off information and sound type settings for each mode are transmitted as exclusive data, however program numbers will not be transmitted. Program numbers will also be transmitted when
Any changes made to the Transmit Program Change On/Off setting will remain until the power is turned off.
When the power is turned off, the Transmit Program Change On/Off setting will return to the default value of ‘On’, however it is possible to use the Memory Backup function to store the preferred Transmit Program Change On/Off setting. Please refer to the instructions on page 56 for more information.
FUNCTION SETTINGS
4
