Page
19
4) SPLIT MODE
The SPLIT function divides the keyboard of the EP3 digital piano into Upper and Lower sections, allowing each section to be played with a different sound.
Step 1
Press the SPLIT button.
The LED indicator for the SPLIT button will turn on, indicating that SPLIT mode has been activated.
In addition, the LED indicator for the PIANO button will also turn on, indicating the Upper section sound, while the BASS button will start to flash, indicating the Lower section.
The selected sound variation numbers will be shown in the LED display.
The left number represents the Lower section, while the right number represents the Upper section.
Step 2
Play the piano.
The Concert Grand sound will be heard in the Upper section, while the Wood Bass sound will be heard in the Lower section.
The number of keys used for the Upper and Lower sections can be freely adjusted by changing the Split Point.
The default Split Point setting is C3.
Step 3
Press and hold the SPLIT button, then press a key on the keyboard.
new Split Point
Press and hold the button | 1 |
|
Lower section | Upper section |
2
Press a key
The name of the pressed key will be shown in the LED display, and will become the new Split Point.
Any changes made to the Split Point will remain until the power is turned off.
When the power is turned off, the Split Point will return to the default setting of ‘C3’, however it is possible to use the Memory Backup function to store the preferred Split Point. Please refer to the instructions on page 56 for more information.
PLAYING THE PIANO
2
