Kenmore 5, 11, 7, 3, 9 manual HOOK-UP to Tractor, Mower

HOOK-UP TO TRACTOR

Fig.8

It is important that the Mower Frame is ‘level’ for the correct set-up for mowing. Connect the Mower Swivel Hitch to the Tractor Draw Bar using an approved Draw Pin. The front and rear Jack Shafts should be the same height from the ground.

IMPORTANT

Adjust the Swivel Hitch to set the Mower Frame level to the ground. It is removable to allow it to be rotated 180 degrees to increase the adjustment relative to the Tractor Draw Bar.

(Optional Ball Hitch also illustrated).

IMPORTANT

The use of a Draw Bar hung between the 3-Point

Hitch Arms is not recommended.

Connect the PTO Shaft to the Mower Gearbox and the Tractor Tail Shaft, see Fig.6, and secure the Shields.

WARNING

The PTO Shields are identified : Tractor End and Mower End. If Shields are missing do not operate the

Mower.Fig.8

13