Kenmore 3, 11, 5, 7, 9 manual Maintenance

MAINTENANCE

Reel Drive Belts

To replace The Reel Drive Belts. Reels 8 and 9.

•Remove the Sheave Guard.

•Remove the Safety Chain at the Stay Rod.

•Compress the Telescopic Arm. Refer to Fig.33

•Remove the Belt from the Sheaves.

•Release the Compression Tool to fully expand the Telescopic Arm.

•Pull the Reel ‘out,’ to separate the Telescopic Arm, and remove the Belt.

•Install a new Drive Belt and re-assemble in the reverse order.

To replace the Reel Drive Belts. Reels 10 and 11.

•Remove the Bearing Cover

•Remove the Set Screw from ‘outer’ end of the PTO Shaft, and slide it off the Jackshaft.

•Compress the Telescopic Arm. Refer to Fig.33.

•Install a new Drive Belt and re-assemble in the reverse order.

IMPORTANT

Apply ‘Loctite 242’ to the PTO Shaft Setscrews.

Fig.36

Fig.37

40