7.Install the Door Bracket to the inside of front Cart Legs. Align the threaded holes on the Door Bracket with the holes on Cart Legs. Tighten securely using 4 of the 1/4"x2" Pattern Head Screws provided. (See Figure 3 on page 13)

Upper door bolt holes (at ends of bracket) must face outward.

[] Installing The Cabinet Doors

For LP Gas grills:

1.Install the Door Stops to the Cart Bottom Shelf and the Door Bracket. See Figure 4a.

2.Align the holes on the Door Stops with the threaded holes on the top of the Cart Bottom Shelf and bottom side of Door Bracket. Tighten securely using 4 of the 1/4"xl/2" Pattern Head Screws provided. See Figure 4a.

3.Remove the white protective film from the stainless steel Doors. Attach a Door Handle to

each Door using 2 of the M4x5mm Pattern Head Screws provided. See Figure 4b. Be careful not to scratch the Door surfaces.

4.When installing the Doors, make sure the

door bolt holes are located on the hinge sides of the Cart Legs.

5, Install either Door by inserting 1/4"x5/8" partly- threaded bolt through the lower door bolt hole of the Door and into the tapped hole of the Cart Bottom Shelf. Next, align the upper door bolt hole of Door with the tapped hole in the bottom of Door Bracket. Insert 1/4"xl/2" partly- threaded bolt provided. Tighten both bolts securely.

6.Repeat these steps to install the other Door.

7, Install the Cart Spice Basket to the inside of Left Door. Align the threaded holes on the inside of Left Door with the holes on the Cart Spice Basket. Tighten securely using 2 of the 1/4"xl/2" Pattern Head Screws provided. See Figure 4b.

Figure 4a (LP gas model only)

DOOR _

BRACKET

DOORSTOP _

Found in

Hardware Pack

CARTBOTTOM

SHELF/

TANK PULL-OUT

TRAY ASSEMBLY

Figure 4b (LP gas model only)

DOOR

UPPER DOOR BRACKET

BOLT HOLE

\\\\\

LEFT DOOR

DOOR_

HANDLE

 

\

 

l/

LOW ER DOOR

BOLT

HOLE

 

 

CART SPICE

 

BOTTOM

 

 

BASKET

 

SHELF

RIGHT DOOR

14

Page 14
Image 14
Kenmore 141.173373, 141.153373 owner manual Found