_llnstalling The Grill Head
1.Now that you've assembled the grill cart you can install the
people.
BE CAREFUL NOT TO PINCH FINGERS WHEN LOWERING HEAD ONTO CART
2.For LP Gas grills:
With an assistant, lift and position the Grill Head onto the grill cart. Place the Side Burner
Gas Valve Assembly through the slot in side of Grill Head as illustrated in Figure 6a. Align the 4 holes of the Bowl Side Panel to the
threaded holes on the Cart Leg Bracket.
Thread the Electric Wire into the Wire Fastener. Secure Wire Fastener to Right Rear Bowl location on Grill Head using 1 of the 1/4"xl/2" Pattern Head Screw. Finish securing Grill Head to Cart using 3 of the 1/4"xl/2" Pattern Head Screws provided.
3.For Natural Gas grills:
With an assistant, lift and position the Grill Head onto the grill cart. Place the Side Burner
Gas Valve Assembly and Electric Wire through the slot in side of Grill Head as illustrated in
Figure 6b. Align the 4 holes of the Bowl Side Panel to the threaded holes on the Cart Leg Bracket. Secure firmly by using 4 of the 1/4"x 1/2" Pattern Head Screws provided.
Imlnstalling Lighting Stick
1.Attach the Lighting Stick to the Left Bowl Support Bracket as shown in Figure 7.
Align the hole at the end of Lighting Stick Wire with the threaded hole on the Left Bowl
Support Bracket. Tighten securely using the M4x8mm Pattern Head Screw.
Figure 6a (LP gas model only)
GRILL HEAD | BOWL SIDE PANEL |
ELECTRIC WIRE
FROM GRILL HEAD
CARTLEG
BRACKET
WiRE FASTENER
FROM C
_\ | VALVE ASSEMBLY |
LEFT CART LEG
_HT CART LEG
Figure 6b (Natural gas model only)
GRILL HEAD
/
%\ | BOWL SIDE PANEL |
CARTLEG
BRACKET
\
\
BURNER GAS
VALVE ASSEMBLY
ELECTRIC WIRE
FROM GRILL HEAD
LEFT CART LEG
_'RIGHT CART LEG
Figure 7
LEFT OUTSIDE
BOWL PANEL
M4x8mmPATTENN_
HEAD SCREW
UGHTtNG STICK
16
