[] Installing The Cabinet Doors
For Natural Gas grills:
1.Install the Door Stops to the Cart Bottom Shelf and the Door Bracket. See Figure 5a.
2, Align the holes on the Door Stops with the threaded holes on the top of the Cart Bottom Shelf and bottom side of Door Bracket. Tighten securely using 4 of the 1/4"xl/2" Pattern Head Screws provided. See Figure 5a.
,Remove the white protective film from the stainless steel Doors. Attach a Door Handle to
each Door using 2 of the M4x5mm Pattern Head Screws provided. See Figure 5b. Be careful not to scratch the Door surfaces.
4. | When | installing | the | Doors, | make sure | the | ||
| door bolt holes are located on the hinge sides | |||||||
| of the | Cart Legs. |
|
|
|
| ||
5. | Install | either | Door by | inserting 1/4"x5/8" | partly- | |||
| threaded bolt through the lower door bolt hole | |||||||
| of the Door and into the tapped hole of the | |||||||
| Cart Bottom Shelf. Next, align the upper door | |||||||
| bolt hole of Door with the tapped hole in the | |||||||
| bottom of Door Bracket. Insert 1/4"xl/2" partly- | |||||||
| threaded bolt provided. Tighten both bolts | |||||||
| securely. |
|
|
|
|
|
| |
6. | Repeat | these steps to install the other Door. | ||||||
7. | Install | the Cart | Spice | Basket | to the inside of Left | |||
| Door. Align the threaded holes on the inside of Left | |||||||
| Door with the holes on the Cart Spice Basket. | |||||||
| Tighten securely using 2 of the 1/4"xl/2" Pattern | |||||||
| Head | Screws | provided. | See | Figure 5b. |
| ||
8. | Install | the Cart Spice | Basket | to the inside of Right | ||||
| Door. Align the threaded holes on the inside of Right | |||||||
| Door with the holes on the Cart Spice Basket. | |||||||
| Tighten securely using 2 of the 1/4"x1/2" Pattern | |||||||
Figure 5a (NG gas model only)
DOOR _
BRACKET
DOOR STOP J
Found in
Hardware Pack
J
J
f
CARTBOTTOM
SHELF
Figure 5b (NG gas model only)
DOOR
BRACKET
UPPER DOOR
BOLT HOLE
LEFTDOOR
\\\
DOOR
HANDLE
/
CART SPICE
Head Screws provided. See Figure 5b. |
• When you have finished assembling your |
grill we strongly urge that all Pattern |
Head Thumb Screws be tightened, either |
with the supplied Tightening Tool or a |
#2 Phillips Head Screwdriver. |
Tightening Tool
Ref. # P05515102K
BASKET
CARTBOTTOM
SHELF
/ | RIGHT DOOR |
/ | |
CART SPICE |
|
BASKET |
|
15
