@ VOLUME knob | ¢ $ SOUND SELECTOR key | ||
Used for volume adjustment. |
| Used to switch the function of the INPUT SEL./MULTI | |
# INPUT SEL. / MULTI CONTROL knob |
| CONTROL knob to the sound setting function. | |
| MODE key | ||
In the normal mode, this is used for selecting an input | |||
Used to switch the function of the INPUT SEL./MULTI | |||
source. |
| ||
| CONTROL knob to menu selection mode. | ||
In the function menu mode (selected by pressing the | |||
SET key | |||
MODE key), turn this knob to select the desired menu | |||
item. To set or enter setting of the function menu | During MODE operation: Used to confirm the selected | ||
item, press the SET key. |
| item. | |
Items of function menu mode : |
| During SOUND operation: Used to confirm the se- | |
SOUND PRESET | º | lected item. | |
D.EQ Rec Mode | Q | Used to confirm the program No. at the time of DVD/ | |
REC LEVEL | Q | CD. | |
% Clear voice indicator | |||
D.AUDIO OUT | p | ||
Tone indicator | |||
INPUT LEVEL | y | ||
AUTO MEMORY | ‚ | A.R. EQ (Auto Room EQ) indicator | |
Rec. Out indicator | |||
DIMMER SET | ∏ | ||
| |||
LEVEL METER | a | ^ SURROUND indicator | |
A.P.S. SET | a | L : Left signal indicator | |
TIME ADJUST | £ | ||
| |||
TIMER SET | Á | C : Center signal indicator | |
AUTO ROOM EQ | § | R : Right signal indicator | |
• Some of the items may not be displayed depending on | LEF : LEF signal indicator | ||
selected input source. |
| ||
|
| ||
Used to select a desired item after pressing the | SL/SR/S : Surround signal indicator | ||
Lights according to the number of audio signal | |||
SOUND SELECTOR key to switch to sound setting | |||
mode. Use the SET key for confirmation. |
| channels of the selected source. | |
Items of function menu mode : |
| & Display panel | |
"SURROUND" | ⁄ | ||
| |||
• |
| ||
"TONE" | • |
|
Preparations
section Basic
section Application
section Knowledge
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the unit to back up the memory. This is called Standby mode. Under the condition, the unit can be turned ON by the remote control unit.