Basic use method
Preparations
Basic section
Application section
Knowledge section
Using Digital Sound Equalizer function
D-BASS Setting
The
1Press the SOUND SELECTOR key, turn the INPUT SEL./MULTI CONTROL knob to se- lect
or
÷The
2Turn the INPUT SEL./MULTI CONTROL knob [press the MULTI CONTROL key on the remote] to select "Music" or "Movie". Then press the SET key.
or
3Adjust the level with the INPUT SEL./MULTI CONTROL knob [press the MULTI CONTROL key on the remote].
|
| Increase |
|
| the level |
|
| or |
Decrease | Increase | Decrease |
the level | the level | the level |
÷The level can be adjusted at the range of 0 - 10.
4Press the SET key to confirm.
÷Press the SOUND SELECTOR key to end the operation or to cancel it.
÷The
TONE / TURN OVER setting
In this unit, TREBLE and BASS sounds can be adjusted to your preferences. (TONE)
In addition, frequency characteristics of the TREBLE and BASS sounds can be adjusted with the three types of Low, Mid and High. (TURN OVER)
1Press the SOUND SELECTOR key, turn the IN- PUT SEL./MULTI CONTROL knob to select “TONE”. Then press the SET key. [press the TONE TURN OVER key on the remote].
or
÷TONE/TURN OVER setting is not possible when D.EQ RecMode is on.
2Press the MULTI CONTROL @ / # key on the remote to select a frequency type (Low: 100Hz, Mid: 150Hz, High: 200Hz)
3Adjust the level of BASS with the INPUT SEL./MULTI CONTROL knob [MULTI CON- TROL % / fi key].
|
| Increase |
|
| the level |
|
| or |
Decrease | Increase | Decrease |
the level | the level | the level |
4Press the SET key to confirm BASS.
Continued to next page
The items