Various disc playback features
To add a track to an existing program
1Select the track number to be added with the Numeric keys on the remote control unit.
Press the key in the stop mode.
Press the Numeric keys as shown below; To select track No. 23: +10, +10, 3
To select track No. 30: +10, +10, +10, 0
÷Up to 32 tracks can be programmed. When "PGM FULL" is displayed, no more tracks can be programmed.
÷If you made a mistake, press the CLEAR key and enter the track No. again.
÷When a track No. is entered, the track will be added to the end of the existing program.
Preparations
2Press the SET key.
To clear a programmed track
|
|
|
|
| |
Press the CLEAR key on the remote control unit. |
|
|
|
|
|
Press the key in | L |
|
|
|
|
the stop mode. |
|
|
|
| |
30 10 | 5 | 3 | 1 | ||
PGM | R |
|
|
|
|
÷ Each time the key is pressed, the last track in the | |||||
program is cleared. |
|
|
|
|
|
To get out of the PGM mode |
|
|
|
|
|
Press the P.MODE key on the remote control |
|
|
|
|
|
unit to turn off the PGM indicator. |
|
|
|
|
|
Press the key in | L |
|
|
|
|
the stop mode. |
|
|
|
| |
30 10 | 5 | 3 | 1 | ||
| R |
|
|
|
|
Goes off |
|
|
|
|
|
The program mode is canceled when the unit is turned off or the disc is ejected. The programmed information is cleared entirely at this time.
section Basic
section Application
section Knowledge