Clock adjustment
As the clock is not only used to show the time of the day but also used in timer operations, be sure to set the clock adjustment in advance.
Turn POWER ON. ¢
1Select "TIME ADJUST".
1 Press the MODE key, turn the INPUT SEL./
MULTI CONTROL knob to select "TIME ADJUST". Then press the SET key.
L 
30 10 5 3 1
R 
÷ The time display starts to blink.
2Adjust the day of week.
Example: Adjustment to Monday 8:07
1 Adjust the day of week
2 Press the SET key.
L 
30 10 5 3 1
R 
÷ After the day is input, the hour display starts to blink.
Decrease Increase
Preparations
section Basic
3Adjust the hour.
1Adjust the hour
2Press the SET key.
4Adjust the minute.
1Adjust the minute.
2Press the SET key.
Example: Adjustment to Monday 8:07
L 
30 10 5 3 1
R 
÷After the hour is input, the minute display starts to blink.
Example: Adjustment to Monday 8:07
L 
30 10 5 3 1
R 
÷If you made a mistake, restart from the beginning.
÷When the time of day has been set by pressing the SET key, the display shows "COMPLETE".
÷After a power failure or the AC power cord has been unplugged, the time set will be cleared. You have to set the time again when the unit is switched on.
÷When the 7 (STOP) key is pressed while the power is in the standby mode, the time of day will be displayed for 5 seconds.
section Application
section Knowledge