Basic use method

5The TREBLE setting is displayed.

6Press the MULTI CONTROL @ / # key on the remote to select a frequency type (Low: 5kHz, Mid: 7kHz, High: 10kHz)

7Adjust the level of TREBLE with the INPUT SEL./MULTI CONTROL knob [press the MULTI CONTROL key on the remote].

8Press the SET key to confirm TREBLE.

÷The level can be adjusted by one step (1dB) at the range of -6(dB) to +6(dB).

÷The TONE indicator lights up after the setting when the level is other than "0".

÷Image of variable frequencies (TURN OVER)

LEVEL

Variable

Variable

 

Frequencies

Frequencies

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Low

Mid

High

BASSTREBLE

Frequency

÷Image of the level adjustment

LEVEL(dB)

Variable levels

+6

0

-6

BASSTREBLE

Frequency

Making your favorite sounds (MANUAL EQ )

This unit is equipped with 7-band equalizer. It enables you to make your favorite frequency response curve with frequencies from super bass to super high range. º

1Press the MANUAL EQ key on the remote control unit.

÷Equalizer curve, level and frequency are displayed and the EQ indicator blinks.

2Select an equalizer band (frequency) by pressing the MULTI CONTROL @ / # key on the remote.

÷The display of selected band blinks.

÷The frequency bands from 1 to 7 can be selected.

3Adjust the equalizer level by pressing the MULTI CONTROL % / fi key on the remote.

÷The level can be adjusted by one step (1dB) at the range of -8(dB) to +8(dB).

÷The manual EQ setting mode will be cancelled when the MANUAL EQ key is pressed.

÷Image of level adjustment

Preparations

section Basic

section Application

÷Press the SOUND SELECTOR key to end the op- eration or to cancel it.

LEVEL(dB)

+8

0

Variable levels

Knowledge

-8

Frequency

section

The settings for TONE/TURN OVER and MANUAL EQ cannot be applied at the same time.

29 EN