Option settings for external recording
Setting D.EQ RecMode (digital equalizer recording mode)
1Press the MODE key, turn the INPUT SEL./ MULTI CONTROL knob to select “D.EQ RecMode”. Then press the SET key.
"DIGITAL EQ REC": The sound is recorded with the MANUAL EQ settings. ª
Switching as shown below is done each time the knob is turned.
"D.EQ ON" : The digital equalizer effect is reflected
in the recorded sound.
"D.EQ OFF" : The digital equalizer effect is not reflected in the recorded sound. (Initial setting)
2Turn the INPUT SEL./MULTI CONTROL knob to select “D.EQ ON” or "D.EQ OFF". Then press the SET key.
÷The settings for
÷In order to prevent clipping of the digital signal, record- ing is done with a slightly lower volume. It is possible to adjust the recording level so that no clipping is done, while looking at the level meter. (Setting the record- ing level)
Preparations
Setting the recording level
1Set the recording pause condition.
2Press the MODE key, turn the INPUT SEL./ MULTI CONTROL knob to select “REC LEVEL”. Then press the SET key.
÷The level can be adjusted in the range from
section Basic
section Application
3 Turn the INPUT SEL./MULTI CONTROL knob to adjust the recording level. Then
press the SET key. Knowledgesection