English

16

Tuner features (See page 8)

 

Switching Display for Tuner

 

Canceling Direct Access Tuning:

 

You can change the display used when listening to the radio.

 

 

 

 

Press the DIRECT button again.

 

 

 

 

 

 

 

 

Changing the Display:

 

 

 

 

 

 

 

 

 

 

Each time you press the CLK button, the display changes as

 

 

Station Preset Memory

 

 

 

 

follows:

 

 

Store the frequency of a station. You can then recall that

 

 

 

 

 

 

 

 

 

 

 

 

 

▼

 

 

station with a single touch of a button.

 

 

 

 

Station frequency

1

Select the band/station that you want to have stored.

 

 

 

 

▼

 

 

 

 

Program Service name (during RBDS station reception) /

2

Press the button (#1-6) that you want to use for the station, for

 

 

 

 

SNPS name (only when being preset)

 

 

 

 

 

 

 

 

at least two seconds.

 

 

 

 

▼

 

 

 

 

 

 

 

 

Radio text (only during RBDS station reception)

 

 

 

 

The button number blinks once in the display to indicate that

 

 

 

 

▼

 

 

 

 

the data has been stored.

 

 

 

 

Clock

 

 

Recalling a Preset Station:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the preset station button (#1-6) for the desired station.

 

 

 

 

 

 

 

 

 

 

 

The number of the recalled station is displayed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Function of Remote (See page 11)

 

 

 

NOTE

 

 

 

 

 

 

 

 

 

 

You can store six stations in each of the FM1, FM2, FM3, and

 

 

 

 

 

 

 

 

 

 

 

 

Direct Access Tuning

 

 

 

 

 

 

 

 

AM bands.

 

 

When you know the frequency of the station that you want to

 

 

 

 

 

 

 

 

 

 

 

 

 

listen to, you can input it directly for quick access.

 

 

 

 

 

 

 

 

(Function of remote)

 

 

Auto Memory Entry

 

1

Select the band by pressing the FM or AM button.

 

 

You can automatically store all the receivable frequencies in

 

2

Press the DIRECT button.

 

 

the band currently being listened to, and then recall them with

 

 

 

the touch of a button later. This function is especially useful

 

 

 

 

In the display, "----" blinks for 10 seconds.

 

 

when you are travelling and do not know what stations are

 

 

 

 

If you make no input in the 10-second period, direct access

 

 

available. Up to six frequencies can be stored this way.

 

 

 

 

tuning is automatically canceled.

 

1

Select the band for which you want to store stations.

 

3

Enter the frequency of the desired station while the display is

 

 

 

2

Press the AME button for at least two seconds to start auto

 

 

 

 

blinking.

 

 

 

 

 

If you want to listen to an FM station at 92.1 MHz, for

 

 

 

 

memory entry.

 

 

 

 

example, press 0, 9, 2, and 1.

 

 

 

 

The numbers of the preset station buttons are shown in order.

 

 

 

 

If you want to listen to an AM station at 810 kHz, for example,

 

 

 

 

When all the stations in a certain band are stored in the preset

 

 

 

 

press 0, 8, 1, and 0.

 

 

 

 

memory, the auto memory entry stops. The tuner then plays

 

 

 

 

 

 

 

 

 

 

 

the last station received.

 

 

 

NOTE

 

 

 

 

 

 

 

 

 

 

 

Recalling a Preset Station:

 

 

 

When a frequency which cannot be received is input, this

 

 

 

 

 

 

 

 

 

Press the preset station button (#1-6) for the desired station.

 

 

 

frequency is not verified and operation returns to the original

 

 

 

 

 

 

 

 

 

 

 

The number of the recalled station is displayed.

 

 

 

frequency input mode.