will appear alternately in the display.

In that case, press the FM/AM button to change the display to a station that you want to erase, and then press the CLK button again for at least two seconds. The newly entered station will thus be stored.

5Press the PTY button to end the program type selection mode.

Confirming Program Type You Registered:

Press the CLK button.

The program type of the station currently tuned to will be displayed for five seconds. During that time, "E" will blink in the display.

NOTE

•If you tune to frequencies for which no program type has been stored, "NO ENTRY" will be displayed.

•All the program type you registered will be erased if you press the RESET button.

CD player features (See page 9)

Playing CDsPlay:

Press the CD button to slide open the faceplate, showing the CD (insertion) slot. Holding the CD with the labeled side facing up, insert it in the slot. The faceplate will show the control panel, and the CD will start playing.

The 3 indicator lights up when a CD is being played.

Playing CDs Already Inserted:

The 32 indicator will light when a CD has been inserted. Press the CD button to start play.

Pausing and Restarting CD Play:

Press the CD button to make the disc pause.

The 8 indicator lights up.

Press the same button again to start play again.

Stop / Eject:

Press the EJECT button for at least one second to stop CD play. The faceplate will slide to eject the CD.

Press the CD, CH or TUN button to show the control panel.

2CAUTION

•Do not attempt to insert a CD into the slot if another one is already there.

•The unit can only play 5 in. CDs. If you insert a 3 in. CD, it will get stuck inside and can cause the unit to malfunction.

NOTE

•The sound will be temporarily muted while the faceplate is moving.

•The only buttons that will work during the eject state are the CD, CH, and TUN buttons, as well as the volume control button.

•When you load a CD and eject it right away, the next time you try to insert the CD may not load. In such a situation, take the CD out for a moment and then reinsert it.

•The faceplate is a piece of precision equipment.

Do not keep the faceplate open and subject it to excessive force during its opening and moving.

English

21