English

Disc changer control features (See page 10)

Function of Remote (See page 11)

Disc Name Preset Play (DNPP)

If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it.

1Press the DNPP button on the remote.

"DNP PLAY" will appear in the display, and the disc name preset play mode is entered.

The names of all the discs in the disc changer will appear successively in the display for five seconds each. Discs whose names have not been preset will appear as "NO NAME" in the display.

NOTE

Discs in the disc changer that have never been played before will appear as "NO ACCES" when the disc names are displayed. When you cannot identify a disc because of the "NO ACCES" display after inserting a disc magazine, try playing it using the disc scan or a similar function to display the disc name.

Rapid display (forward / reverse):

Press the DISC+ or DISC– button.

Pressing the DISC+ button will rapidly display the preset names/disc titles in order.

Pressing the DISC– button will rapidly display the preset names/disc titles in reverse order.

2When the name appears for the disc you want to play Press the OK button.

The disc whose name is displayed will be recalled, and the disc name preset play (DNPP) mode will end.

To cancel DNPP mode: Press the DNPP button.

The disc name preset play (DNPP) mode will be canceled.

Other features (See page 10)

Audio Control SettingAdjust various parameters of sound quality.

1Press the AUD button to enter the control mode.

2Press either the FM or AM button.

Each time the button is pressed, the adjustment mode will change as follows:

Pressing the FM button advances the display, and pressing the AM button reverses it.

• When preout is switched to unbalanced

 

 

 

 

 

▼

 

Only when Non-fading output is

 

 

 

Bass

 

 

LevelN-F(set to on

)

 

 

▼

▲

 

Treble

Fader

 

▼

▲

 

Balance

 

 

 

 

 

 

 

 

•When preout is switched to balanced

 

 

 

 

 

 

▼

 

 

Only when monaural output is

 

 

 

 

Bass

Sub-preout

 

 

 

level

(set to on

)

▼

▲

 

 

Treble

Balance

 

 

 

 

▲

 

 

 

 

 

 

 

 

NOTE Source tone memory

Each source (CD, FM, AM and disc changer) has its own memory in which to store the bass and treble tone settings.

The settings made for a particular source are recalled automatically whenever you use that source (for example, FM mode uses the tone settings made for FM, AM for AM, etc.).

3Press the 4/¢ button.

Look at the table (See page 29) to adjust the mode being displayed.

4Press the AUD button to end the control mode.

28