English

Tuner features (See page 8)

 

 

 

Function of Remote (See page 11)

 

Clean Reception System Circuit (CRSC)
Station Name Preset Play (SNPP)

 

Temporarily have reception switched from stereo to mono to
You can search for the station for any station if its name has

 

reduce multi-path noise when listening to the FM station.
been preset using Station Name Preset.

 

The factory default for this function is ON.

1 Press the DNPP button on the remote.

 

Turning CRSC On/Off:

 

“SNP PLAY” will be displayed once the station name preset

 

 

Press the CRSC button for at least one second to turn the

 

 

 

function on/off. "CRSC ON" is displayed when CRSC is on.

 

play mode is entered.

 

 

 

 

 

 

 

 

The names of the stations preset in the band currently listened

 

 

NOTE

 

 

to are displayed for five seconds each. The display band

 

 

Strong electrical fields (such as from power lines) may cause

 

switches in the following order:

 

 

unstable sound quality when CRSC is turned on. In such a

 

 

= FM1 Ô FM2 Ô FM3 Ô AM +

 

 

 

 

 

situation, turn it off.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Each time you press the ¢ button, the station display

 

 

 

 

 

switches in the forward direction.

 

 

 

 

 

Each time you press the 4 button, the station display

 

 

 

 

 

 

Frequency Step Setting

 

switches in the reverse direction.

 

 

 

Switch the frequency step used in seeks. The factory defaults

 

Stations whose names have not been stored will be displayed

 

 

as frequencies.

 

are 200 kHz for FM and 10 kHz for AM.

 

The program service name will appear for RBDS stations.

 

Switching the Frequency step:

 

 

 

 

 

 

 

 

 

NOTE

Changing the Displayed Band

 

 

While pressing buttons #1 and #5 at the same time, press the

 

Pressing the FM button switches between the FM1, FM2, FM3

 

 

RESET button.

 

and AM displays, in that order.

 

 

The frequency step settings will be changed to 50 kHz for FM

 

Pressing the AM button switches between the displays in the

 

 

and 9 kHz for AM.

 

reverse direction.

 

 

 

 

 

 

 

NOTE

 

2 Once the name is displayed for the station you want to listen

 

 

When you change the frequency step settings, all memory

 

to

 

 

contents will be erased.

 

Press the OK button.

 

Returning Frequency Step Settings to Original Values:

 

Reception starts of the displayed station, and the station name

 

 

 

 

Press the RESET button.

 

preset play mode ends.

 

 

 

 

 

 

 

Canceling mode during input:

 

 

 

 

 

Press the DNPP button.

 

 

 

 

 

The station name preset play mode is canceled.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18