Table of Audio Control Setting

Adjustment

Operation of Audio control button

mode

 

 

(Display)

4 button

¢ button

Bass

Bass decreased.

Bass increased.

(“BAS”)

 

 

 

 

 

Treble

Treble decreased.

Treble increased.

(“TRE”)

 

 

 

 

 

Balance

Left channel

Right channel

(“BAL”)

emphasized.

emphasized.

 

 

 

Fader

Rear channel

Front channel

(“FAD”)

increased.

increased.

 

 

 

Non-Fading

Non-fading sound is

Non-fading sound

Preout Level

reduced.

emphasized.

(“NF”)

 

 

 

 

 

Balanced

Monaural sound is

Monaural sound

monaural

preout level

reduced.

emphasized.

(“SUB”)

 

 

 

 

 

NOTE

The balance of the non-fading sound cannot be adjusted.

Clock DisplayDisplay the time.Switching to Time Display:

Keep pressing the CLK button until the clock is displayed.

Adjusting Time

You can adjust the time manually. Also, with the automatic time adjustment function set at ON, you can set the clock time automatically according to time data sent from RBDS stations (after receiving RBDS signals for several minutes). The factory default is manual time adjustment.

Adjusting Time Manually:

1When the time is not displayed, first press the CLK button to display the time.

2While holding down the CLK button, press the 4 or ¢ buttons to adjust the time.

The 4 button adjusts the hour and the ¢ button adjusts the minutes.

NOTE

Do not press the CLK button for two seconds or more, as it will change to the name preset mode.

Press the 4 or ¢ button quickly to adjust the clock.

Turning Automatic Time Adjustment On/Off:

1Press the TUN button repeatedly and switch the display to "ALL OFF" to enter the standby mode.

2Press the #1 button for at least three seconds. Each time you press the button, the automatic time adjustment function switches on and off.

"SYNC ON" (automatic time adjustment is on.) "SYNC OFF" (automatic time adjustment is off.)

Adjusting Time Automatically:

Tune to a RBDS station and receive the signal for several minutes.

The clock will adjust automatically to the local time.

NOTE

The clock will not adjust automatically if the RBDS station tuned to is not transmitting time data. In such a case, try another RBDS station.

English

29