Manuals / Brands / Home Audio / Speaker / Kenwood / Home Audio / Speaker

Kenwood LSF-1010 Connecting to Amp's Speaker Output Terminals

1 26

Download 26 pages, 437.31 Kb

LSF-1010 (EN)

12

DEUTSCH FRANÇAIS

ESPAÑOL ITALIANO NEDERLANDS

Connecting to Amp's Speaker Output Terminals

Connect the FROM AMPLIFIER terminals on the subwoofer to the

speaker output terminals on your amplifier or receiver. Connect the

TO SPEAKERS terminals on the subwoofer to your front speakers. Make

all connections using speaker cord.

Speaker cord for the connection between the amp and the subwoofer is not included. Please

purchase this cord separately.

Note

Note

If your amplifier or receiver has two sets of speaker output terminals, you can connect the front speakers directly to the second set of terminals (rather than connecting

them to the TO SPEAKER terminals on the subwoofer).

IMPORTANT

The satellite speakers have a nominal impedance of 6

ohms. Be sure that your amplifier or receiver is able to

work with 6-ohm speakers.

CAUTION

Do not plug in the power cord until you have finished mak-

ing all connections.

SPEAKERS

LR

ª ·ª ·

1

3

2

4

· ª· ª

Speaker cord

(purchased separately)

Subwoofer

Speaker output terminals (on amp or receiver)

Speaker cord (included)

Satellite speakers

(right) (left)

Included speaker cord

White stripe

Twist the wire.

Making Connections

Contents

Main Before applying power Caution : Read this section carefully to ensure safe operation. Introduction Safety precautions Caution : Read this section carefully to ensure safe operation. WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Unpacking Introduction Contents IMPORTANT SAFEGUARDS Caution : Read this page carefully to ensure safe operation. IMPORTANT SAFEGUARDS Location and Orientation Attaching the Cushions Satellite Speakers Subwoofer Location and Orientation Location Precautions Interference with AM Reception Subwoofer and Satellite Speaker Magnetic Shielding and TV Color Reception Feedback (Howling) CAUTION (SUBWOOFER only) Setting Up the Satellite Speakers 1. Attach the speaker to the arm. FIRST: Attach speaker cord. Adjusting the Speaker Angle 2. Attach the arm to the stand. Setting Up the Satellite Speakers Before Connecting... Making Connections Subwoofer 1. If your amp or receiver includes a SUBWOOFER PRE- OUT jack: 2. If your amp or receiver does not include a SUBWOOFER PRE-OUT jack: 3. If your amp or receiver includes standard PRE-OUT jacks: Connecting to Amp's SUBWOOFER PRE-OUT Jack Do not plug in the power cord until you have finished mak- ing all connections. Connecting to Amp's Speaker Output Terminals IMPORTANT Connecting to Amp's Standard PRE-OUT Jacks Note About Pin-Plug Cables Components and Their Functions Subwoofer Adjusting the Sound 1. Adjusting the Volume 2. Adjusting the Turnover Frequency Important Operating Notes Satellite Speakers Subwoofer Getting Ready to Adjust 1. Remove the screw cap covering each arm screw. Adjusting the Satellite Speaker Position 2. Loosen the two screws. Adjusting the Arm Height 3. Replace the screw caps. Adjusting the Satellite Speaker Position Adjusting the Arm Angle 2. Set the arm holders to the desired angle. 3. Insert and fasten the arm. Offset Mount Other Ways to Set Up the Satellite Speakers 2. Set the arm holder to vertical position. 3. Attach and fasten the arm. Wall Mount 2. Set the arm holders to the desired angle. 3. Attach speaker cord to the base. 4. Reattach the clip to the pole. 5. Attach and fasten the arm. 6. Mount the stand onto the wall. Clip-on Mount 2. Clamp the clip onto an appropriate object. 3. Attach and fasten the arm. Maintenance Cleaning Contact Restorers 2- 1- Troubleshooting Specifications Subwoofer Satellite speaker