Manuals / Brands / Home Audio / Speaker / Kenwood / Home Audio / Speaker

Kenwood LSF-1010 3. Attach and fasten the arm.

1 26

Download 26 pages, 437.31 Kb

LSF-1010 (EN)

DEUTSCH FRANÇAIS

ESPAÑOL ITALIANO NEDERLANDS

3. Attach and fasten the arm.

1Fit the arm through the holes in the arm

holders, adjust it to the desire height,

and then tighten the arm screws.

2Place the screw caps back over the arm

screws.

You may now want to readjust the angle of the speaker on the arm. You can do

this by loosening the screw holding the speaker to the arm, repositioning the

screw, and then retightening it. See “Adjusting the Speaker Angle,” on page 8.

4. Connect the satellite speaker to the base of the stand using separately pur-chased extension speaker cord.

• Use cord that has a mini-plug (3.5-mm) at one end and a mini-jack (3.5-mm) on

the other. Do not connect the wire from the speaker directly to an amp; the

connection must be relayed through the base.

Other Ways to Set Up the Satellite Speakers

Extension speaker cord

Contents

Main Before applying power Caution : Read this section carefully to ensure safe operation. Introduction Safety precautions Caution : Read this section carefully to ensure safe operation. WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Unpacking Introduction Contents IMPORTANT SAFEGUARDS Caution : Read this page carefully to ensure safe operation. IMPORTANT SAFEGUARDS Location and Orientation Attaching the Cushions Satellite Speakers Subwoofer Location and Orientation Location Precautions Interference with AM Reception Subwoofer and Satellite Speaker Magnetic Shielding and TV Color Reception Feedback (Howling) CAUTION (SUBWOOFER only) Setting Up the Satellite Speakers 1. Attach the speaker to the arm. FIRST: Attach speaker cord. Adjusting the Speaker Angle 2. Attach the arm to the stand. Setting Up the Satellite Speakers Before Connecting... Making Connections Subwoofer 1. If your amp or receiver includes a SUBWOOFER PRE- OUT jack: 2. If your amp or receiver does not include a SUBWOOFER PRE-OUT jack: 3. If your amp or receiver includes standard PRE-OUT jacks: Connecting to Amp's SUBWOOFER PRE-OUT Jack Do not plug in the power cord until you have finished mak- ing all connections. Connecting to Amp's Speaker Output Terminals IMPORTANT Connecting to Amp's Standard PRE-OUT Jacks Note About Pin-Plug Cables Components and Their Functions Subwoofer Adjusting the Sound 1. Adjusting the Volume 2. Adjusting the Turnover Frequency Important Operating Notes Satellite Speakers Subwoofer Getting Ready to Adjust 1. Remove the screw cap covering each arm screw. Adjusting the Satellite Speaker Position 2. Loosen the two screws. Adjusting the Arm Height 3. Replace the screw caps. Adjusting the Satellite Speaker Position Adjusting the Arm Angle 2. Set the arm holders to the desired angle. 3. Insert and fasten the arm. Offset Mount Other Ways to Set Up the Satellite Speakers 2. Set the arm holder to vertical position. 3. Attach and fasten the arm. Wall Mount 2. Set the arm holders to the desired angle. 3. Attach speaker cord to the base. 4. Reattach the clip to the pole. 5. Attach and fasten the arm. 6. Mount the stand onto the wall. Clip-on Mount 2. Clamp the clip onto an appropriate object. 3. Attach and fasten the arm. Maintenance Cleaning Contact Restorers 2- 1- Troubleshooting Specifications Subwoofer Satellite speaker