Kenwood LSF-1010 Location and Orientation

LSF-1010 (EN)

DEUTSCH FRANÇAIS

ESPAÑOL ITALIANO NEDERLANDS

Location and Orientation

Attaching the Cushions

Attach four cushions to the base of the subwoofer, one at each corner, as shown below.

The cushions prevent the subwoofer from sliding, and dampen its vibrations. (Cushions

are included in the package.)

• You can position the subwoofer vertically or horizontally.

KENWOODKENWOOD

The subwoofer can be positioned either vertically or horizontally.

CAUTION

Be sure to unplug the speaker

before changing the orienta-

tion.

Vertical Orientation Horizontal Orientation

Satellite Speakers

For detail, see page 8 “Setting Up the Satellite Speakers”

Subwoofer

KENWOOD

For standard setup, mount each speaker to a stand as described below.

Contents

Main Before applying power Caution : Read this section carefully to ensure safe operation. Introduction Safety precautions Caution : Read this section carefully to ensure safe operation. WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Unpacking Introduction Contents IMPORTANT SAFEGUARDS Caution : Read this page carefully to ensure safe operation. IMPORTANT SAFEGUARDS Location and Orientation Attaching the Cushions Satellite Speakers Subwoofer Location and Orientation Location Precautions Interference with AM Reception Subwoofer and Satellite Speaker Magnetic Shielding and TV Color Reception Feedback (Howling) CAUTION (SUBWOOFER only) Setting Up the Satellite Speakers 1. Attach the speaker to the arm. FIRST: Attach speaker cord. Adjusting the Speaker Angle 2. Attach the arm to the stand. Setting Up the Satellite Speakers Before Connecting... Making Connections Subwoofer 1. If your amp or receiver includes a SUBWOOFER PRE- OUT jack: 2. If your amp or receiver does not include a SUBWOOFER PRE-OUT jack: 3. If your amp or receiver includes standard PRE-OUT jacks: Connecting to Amp's SUBWOOFER PRE-OUT Jack Do not plug in the power cord until you have finished mak- ing all connections. Connecting to Amp's Speaker Output Terminals IMPORTANT Connecting to Amp's Standard PRE-OUT Jacks Note About Pin-Plug Cables Components and Their Functions Subwoofer Adjusting the Sound 1. Adjusting the Volume 2. Adjusting the Turnover Frequency Important Operating Notes Satellite Speakers Subwoofer Getting Ready to Adjust 1. Remove the screw cap covering each arm screw. Adjusting the Satellite Speaker Position 2. Loosen the two screws. Adjusting the Arm Height 3. Replace the screw caps. Adjusting the Satellite Speaker Position Adjusting the Arm Angle 2. Set the arm holders to the desired angle. 3. Insert and fasten the arm. Offset Mount Other Ways to Set Up the Satellite Speakers 2. Set the arm holder to vertical position. 3. Attach and fasten the arm. Wall Mount 2. Set the arm holders to the desired angle. 3. Attach speaker cord to the base. 4. Reattach the clip to the pole. 5. Attach and fasten the arm. 6. Mount the stand onto the wall. Clip-on Mount 2. Clamp the clip onto an appropriate object. 3. Attach and fasten the arm. Maintenance Cleaning Contact Restorers 2- 1- Troubleshooting Specifications Subwoofer Satellite speaker