Manuals / Brands / Home Audio / Speaker / Kenwood / Home Audio / Speaker

Kenwood LSF-1010 Components and Their Functions

1 26

Download 26 pages, 437.31 Kb

LSF-1010 (EN)

14

DEUTSCH FRANÇAIS

ESPAÑOL ITALIANO NEDERLANDS

1POWER switch

Press this switch to set the subwoofer's power on or off.

2POWER indicator

Indicator lights up when power is on.

3VOLUME adjuster dial

4PHASE switch

5TURNOVER FREQUENCY adjuster dial

Components and Their Functions

Adjusting the Sound

The VOLUME, TURNOVER FREQUENCY, and PHASE controls allow you to adjust

the sound in accordance with the room acoustics, the subwoofer location. Please

adjust the controls so that you get optimal sound at the room location at which

you normally listen.

1. Adjusting the Volume

Adjust the volume by turning the VOL-

UME dial. Adjust so that you get a good

balance with satellite speakers.

2. Adjusting the Turnover Frequency

Use the TURNOVER FREQUENCY dial to

adjust the cutoff frequency (the highest

frequency reproduced by the subwoofer).

Again, adjust so that you get a good bal-

ance with satellite speakers. Appropriate

adjustment depends on the type of the

sound you are reproducing (musical

genre, movie soundtrack, etc.).

3. Switching the Phase

Try switching the phase if you encounter

either of the following problems.

• If the interaction of subwoofer and speak-

ers is producing an unnatural bass.

• If the bass volume at the room location at

which you normally listen seems unnatu-

rally low, possibly as a result of the room

acoustics or the positioning of the subwoofer.

Normal Reverse

PHASE

NOR. REV.

Raise Lower

MIN MAX

VOLUME

TURNOVER

FREQUENCY

80Hz 400Hz

Raise Lower

Subwoofer

Contents

Main Before applying power Caution : Read this section carefully to ensure safe operation. Introduction Safety precautions Caution : Read this section carefully to ensure safe operation. WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Unpacking Introduction Contents IMPORTANT SAFEGUARDS Caution : Read this page carefully to ensure safe operation. IMPORTANT SAFEGUARDS Location and Orientation Attaching the Cushions Satellite Speakers Subwoofer Location and Orientation Location Precautions Interference with AM Reception Subwoofer and Satellite Speaker Magnetic Shielding and TV Color Reception Feedback (Howling) CAUTION (SUBWOOFER only) Setting Up the Satellite Speakers 1. Attach the speaker to the arm. FIRST: Attach speaker cord. Adjusting the Speaker Angle 2. Attach the arm to the stand. Setting Up the Satellite Speakers Before Connecting... Making Connections Subwoofer 1. If your amp or receiver includes a SUBWOOFER PRE- OUT jack: 2. If your amp or receiver does not include a SUBWOOFER PRE-OUT jack: 3. If your amp or receiver includes standard PRE-OUT jacks: Connecting to Amp's SUBWOOFER PRE-OUT Jack Do not plug in the power cord until you have finished mak- ing all connections. Connecting to Amp's Speaker Output Terminals IMPORTANT Connecting to Amp's Standard PRE-OUT Jacks Note About Pin-Plug Cables Components and Their Functions Subwoofer Adjusting the Sound 1. Adjusting the Volume 2. Adjusting the Turnover Frequency Important Operating Notes Satellite Speakers Subwoofer Getting Ready to Adjust 1. Remove the screw cap covering each arm screw. Adjusting the Satellite Speaker Position 2. Loosen the two screws. Adjusting the Arm Height 3. Replace the screw caps. Adjusting the Satellite Speaker Position Adjusting the Arm Angle 2. Set the arm holders to the desired angle. 3. Insert and fasten the arm. Offset Mount Other Ways to Set Up the Satellite Speakers 2. Set the arm holder to vertical position. 3. Attach and fasten the arm. Wall Mount 2. Set the arm holders to the desired angle. 3. Attach speaker cord to the base. 4. Reattach the clip to the pole. 5. Attach and fasten the arm. 6. Mount the stand onto the wall. Clip-on Mount 2. Clamp the clip onto an appropriate object. 3. Attach and fasten the arm. Maintenance Cleaning Contact Restorers 2- 1- Troubleshooting Specifications Subwoofer Satellite speaker