1Plug the AC adapter cable into the adapter jack located on the rear of the charger.

2Plug the AC adapter into an AC outlet.

3Slide a battery pack using the supplied holder or a transceiver equipped with a battery pack into the battery pack slot.

Make sure the metal contacts of the battery pack mate securely with the charger terminals.

The indicator lights red and charging starts.

4When charging is completed, the indicator lights green. Remove the battery pack or the tran-sceiver from the battery pack slot.

It takes approximately 2.5 hours to charge the battery pack.

When the charger will not be used for a long time, unplug the AC adapter from the AC outlet.

When charging a second battery pack, wait for approximately 10 seconds after removing the first battery pack from the charger. If the LED blinks red after installing the second battery pack, remove the battery pack and wait for a few seconds before inserting it again.

7

Page 12
Image 12
Kenwood TK-3130 instruction manual