10
You can change the frequency of each channel:
1Turn the transceiver power OFF.
2Press and hold the MENU key while turning the
transceiver ON (for 1 second).
3Press the ▲ or ▼ key to select the frequency setting
menu.
• The channel number appears with “F” and the current
frequency number.
4Press the MENU key to select “1-F1” (channel 1,
frequency number 1) to “1-F8” (channel 1, frequency
number 8) or “2-F1” (channel 2, frequency number 1)
to “2-F8” (channel 2, frequency number 8).
• Refer to page 31 for the frequencies available for each
channel.
5Press the PTT, MON, or CAL key to exit Menu Mode.
rr
rr
r Make a Call.
1Press and release the CAL key to alert the other
parties that you are making a call.
• A call tone will sound on the other party’s transceiver.
2Press and hold the PTT switch, then speak into the
microphone to transmit.
• The LED lights red while transmitting.
• For best sound quality, speak into the microphone in your
normal speaking voice while holding the microphone
approximately 1.5 inches (3 to 4 cm) from your lips.
3Release the PTT switch when you have finished
speaking.