INSTALLING/ REMOVING THE BELT HOOK

If desired, attach the belt hook to the rear of the transceiver using the 2 supplied screws.

INSTALLING/ REMOVING OPTIONAL ACCESSORIES

Note: Always switch OFF the transceiver power when installing or removing the optional accessories.

The following accessories can be used with this transceiver:

KMC-21 Speaker-Microphone

KHS-21 Headset

EMC-3 Clip Microphone with Earphone To install these accessories:

1Open the SP/MIC tabs on the side of the transceiver.

2Insert the accessory’s plugs into the SP/MIC jacks.

3When you remove the accessory from the transceiver, be sure to cover the SP/MIC jacks with the attached tabs in order to keep dust and dirt away from the contacts.

Note: Refer to the accessory instruction manuals for detailed instruction on each of the accessories.

8

Page 13
Image 13
Kenwood TK-3130 instruction manual INSTALLING/ Removing the Belt Hook