GETTING STARTED
qSwitch the Power ON.
Switch the transceiver power ON by turning the Power switch/ Volume control clockwise.
•A confirmation tone sounds.
To switch the transceiver power OFF, turn the Power switch/ Volume control fully counterclockwise, until a click sounds.
wAdjust the Volume.
Set your desired volume level by rotating the Power switch/ Volume control.
•Clockwise increases the volume and counterclockwise decreases the volume.
Note: To adjust the volume using background noise as a reference, use the monitor function (page 14).
eSelect a Channel.
Select channel 1 or 2 by pressing the ▲ or ▼ key.
•A confirmation tone sounds each time you press the ▲ or ▼ key.
•When you receive a call on your selected channel, you will hear audio from the speaker and the LED will light green.
•To use a signalling code, refer to “QUIET TALK/ DIGITAL QUIET TALK” on page 11.
9
