ENGLISH
How to Use the Battery Pack
Charging the Battery Pack
You can charge the Battery Pack using AC Power Adapter or USB cable.
Connecting the AC Power Adapter
1.Turn off the Miniket Photo by pressing the [POWER] button.
◆Charging will begin only when the Miniket Photo is turned off (using AC Power Adapter or USB cable).
2.Insert the Battery Pack to the Miniket Photo.
3.Open the Connector Cover of the set.
4.Charge the Miniket Photo.
AC Power Adapter | Connect the AC Power Adapter with the Miniket Photo properly |
| and plug the AC Power Adapter to the wall outlet. |
USB Cable | Connect the USB Cable with the Miniket Photo properly and |
| connect the other side to a USB port of a PC. |
|
|
[ Note ]
✤You may use the Miniket Photo powered by the AC Power Adapter indoors where available.
[ Warning ]
✤It is recommended to fully charge the Battery Pack before use.
✤You should only charge the battery in an environment between 32°F (0°C) and 104°F (40°C).
✤If ambient temperature is too low when charging, it may take long to fully charge or may not fully charge the battery, which results the green indicator will not turn on.
✤Before connecting the cable, make sure that you don’t have any foreign substances between connectors.
4 |
Connecting the USB Cable
4
DC Power Jack
USB Port
24
