
ENGLISH
Movie Mode : Setting the Recording Options
Setting the White Balance
The White Balance is used to preserve natural colours under different lighting conditions. It is recommended to set the white balance prior to any recording.
1.Turn the Mode Dial to Movie mode.
2.Press the [POWER] button to turn on the Miniket Photo.
◆The Movie Record screen appears.
3.Press the [MENU] button.
◆Menu screen appears.
4.Move the joystick left / right to select <White Balance>.
5.Move the joystick up / down to select an option, and then press the joystick (OK).
Auto | Automatically sets according to the shooting environment. | |
Daylight | Adjusts the colour according to daylight/indoor, outdoor light | |
|
| |
Cloudy | You can select this when you cannot have daylight as a direct light, such as when it is | |
| ||
Fluorescent H | Suitable in a halogen or | |
|
| |
Fluorescent L | Suitable for a fluorescent light environment. | |
Tungsten | Suitable for an incandescent light environment. | |
|
|
6. Press the [MENU] button to exit the menu.
[ Notes ]
✤You can easily access this function by using the shortcut button (refer to page 94).
✤In general outdoors recording, <Auto> setting will allow users to achieve the best results.
✤As the lighting conditions change, set the appropriate white balance before recording.
✤Regarding <White Balance> use with <Program AE>, refer to page 102.
✤While the menu screen is displayed, pressing the [Record / Stop] button will exit the menu.
3 | STBYSTBY | IN |
640 | REM 44 MinMin |
|
FF |
| AE |
| AUTO |
A
OFFOFF
4MovieMovie
AE
WhiteWhite BalanceBalance
Auto A
Daylight
Cloudy
Fluorescent H
MoveMove | OK SelectSelect MENU ExitExit |
5MovieMovie
AE
WhiteWhite BalanceBalance
Auto
Daylight
Cloudy
Fluorescent H
| MoveMove OK SelectSelect | MENU ExitExit |
6 | STBYSTBY | IN |
640 | REM 44 MinMin |
|
FF |
| AE |
| AUTO |
OFFOFF
96