Connecting the terminals

14

1 Strip coating.

2 Loosen.

 

 

 

 

3 Insert.

4 Secure.

Preparations

Setting up the system

Speaker placement

Center speaker

Subwoofer

Front speaker

Surround speaker

Listening position

1 Strip coating.

2 Push the lever.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Insert the cord.

4 Return the lever.

Connection of banana plugs

1 Secure.

2 Insert.

•Sound will not be heard if the speaker terminal is not fully secured.

•Never short circuit the + and – speaker cords.

•If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatu- ral with ambiguous acoustic imaging. Be sure to connect the speak- ers correctly.

Speaker impedance

After confirming the speaker impedance indications printed on the rear panel of the receiver, connect speakers with matching impedance ratings. Using speakers with a rated impedance other than that indicated on the rear panel of the receiver could result in malfunctions or damage to the speakers or receiver.

Front speakers : Place to the front left and right of the listening position. Front speakers are required for all surround modes.

Center speaker : Place front and center. This speaker stabilizes the sound image and helps recreate sound motion. Be sure to connect a center speaker when using the Dolby 3 Stereo mode.

Surround speakers : Place to the direct left and right, or slightly behind, the listening position at even heights, approximately 1 meter above the ears of the listeners. These speakers recreate sound motion and atmosphere. Required for surround playback.

Subwoofer : Reproduces powerful deep bass sounds.

•Although the ideal surround system consists of all the speakers listed above, if you don't have a center speaker or a subwoofer, you can divide those signals between the available speakers in the speaker

settings steps to obtain the best possible surround reproduction from

the speakers you have available.

)