Specifications

AUDIO section

Rated power output during STEREO operation

100 watts per channel minimum RMS, both channels driven, at 8 Ω from 20 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)

Effective power output during SURROUND operation FRONT (20-20kHz, 0.7% T.H.D. at 8 Ω one channel driven)

..............................................................................

100 W + 100 W

CENTER (20-20kHz, 0.7% T.H.D. at 8 Ω one channel driven)

.............................................................................................

100 W

SURROUND (20-20kHz, 0.7% T.H.D. at 8 Ω one channel

driven) ..................................................................

100 W + 100 W

Total harmonic distortion ...........................

0.05% (1 kHz, 50W, 8 Ω)

Frequency response

 

CD .............................................

10 Hz ~ 60 kHz, +0 dB, –3.0 dB

Signal to noise ratio (IHF’66)

 

PHONO (MM) ........................................................................

75 dB

CD .........................................................................................

91 dB

Input sensitivity / .........................................................impedance

2.5 mV / 27 kΩ

PHONO (MM)

CD .........................................................................

200 mV / 47 kΩ

MONITOR IN ........................................................

200 mV / 47 kΩ

DVD/6CH INPUT ..................................................

200 mV / 47 kΩ

Output level / impedance..............................................................

200 mV / 1 kΩ

TAPE REC

MONITOR OUT ......................................................

200 mV / 1 kΩ

PRE OUT (SUBWOOFER) ......................................

1.5 V / 2.2 kΩ

Tone control

 

BASS ................................................................

±10 dB (at 70 Hz)

TREBLE ..........................................................

±10 dB (at 10 kHz)

Caution : Read this page carefully to ensure safe operation.

VIDEO section

VIDEO inputs / outputs ............................................

1 Vp-p / 75 Ω

VIDEO

(composite)

S VIDEO

(luminance signal) ................................

1

Vp-p / 75 Ω

 

(chrominance signal) .....................

0.286

Vp-p / 75 Ω

COMPONENT VIDEO (luminance signal) .............

1

Vp-p / 75 Ω

 

(CB/CR -signal) ........

+/– 0.324

Vp-p / 75 Ω

FM tuner section

Tuning frequency range ................................... 87.5 MHz ~ 108 MHz

Usable sensitivity (MONO)

................ 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)

50dB quieting...................................................sensitivity

28 µV (75 Ω)/ 40.2 dBf

STEREO

Total harmonic distortion (1 kHz)

MONO ............................................................

0.5% (65 dBf input)

STEREO ........................................................

0.7% (65 dBf input)

Signal to noise ratio (1 kHz, 75 kHz DEV.)

MONO ..........................................................

75 dB (65 dBf input)

STEREO ......................................................

68 dB (65 dBf input)

Stereo separation (1 kHz) ..........................................................

40 dB

Selectivity (±400 kHz) .................................................................

70 dB

Frequency response .................

(30 Hz ~ 15kHz), +0.5 dB, –3.0 dB

AM tuner section

Tuning frequency range

 

10 kHz step .................................................

530 kHz ~ 1,700 kHz

Usable sensitivity .................................................

16 µV / (600 µV/m)

Signal to noise ratio (30% mod. 1 mV input) ...........................

50 dB

DIGITAL AUDIO section

Sampling frequency

...................... 32 kHz, 44.1 kHz, 48 kHz, 96kHz

Input level / impedance / wave length

Optical .............................

(-15 dBm ~ -21 dBm), 660 nm ±30nm

Coaxial .................................................................

0.5 Vp-p / 75 Ω

GENERAL

Power consumption

.................................................................... 2.6 A

AC outlet

 

SWITCHED .......................................

(total 150 W, 1.25 A max.)

Dimensions .....................................................

W : 440 mm (17-5/16")

 

H : 144 mm (5-11/16")

 

D : 399 mm(15-11/16")

Weight (Net) ................................................................

8.8 kg (19.4 lb)

Notes

1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.

Model __________________ Serial Number ________________________