Connecting IR repeaters
IR repeaters enable you to control components located in cabinets or behind glass doors.
IR REPEATER
OUT
IR repeaters
KENWOOD components (Except for DVD player): System control ^
Other components | : IR REPEATER |
1Connect the IR repeater to the device as described in the repeater’s manual.
2Connect the IR repeater cable(s) to the IR REPEATER OUT jack(s).
Notes
•IR repeaters send a signal similar to the device’s own remote control. Xantech repeaters (models
Shape of plug to be connected:
Please use this plug.
IR Repeater OUT
Mono Mini Plug
|
|
|
| Sleeve | ||
|
|
|
|
|
| Tip |
|
|
|
|
|
|
|
IR OUT specification : |
|
|
|
| ||
Terminal |
|
|
| IR OUT LCD | ||
|
|
|
|
|
| Remote |
To Tip |
|
|
| Signal | ||
|
|
|
|
|
|
|
To Sleeve |
|
|
| Ground | ||
Connecting the RF remote antenna
The remote control for the
ANTENNA
RF REMOTE
L
B
RL
R
ARL
RLC
1Insert the jack of the provided RF remote antenna into the ANTENNA RF REMOTE jack.
2Distribute the antenna wire vertically and fix it.
•Distribute the antenna away from the metallic panel.
Important notesHere is list of adjustment which can maximize the operation of your remote control. For optimal operation of the remote control:
1Aim the remote control toward the room where the receiver is located.
2Do not position the receiver and remote control near metal (such as heat ducts). Metal can absorb RF signals.
3Make sure the batteries in the remote control are fully charged. Weak batteries will affect the range of the remote control.
4When there is an obstruction around other equipments that send signal from the remote control, the control distance of the RF remote signal will be short.
Note
•The tests for range limits of the remote control and the receiver are conducted in
19
Preparations