Preparing for surround sound
Speaker settings
3 Press the SET UP or display operation 2 [Next] key to accept the |
setting. |
20
Preparations
To enable you to obtain optimum enjoyment from the receiver's listening modes, make sure to complete the speaker settings (subwoofer, front, center, and surround speakers) as described below.
MULTI CONTROL
SET UP
POWER ( ) |
|
Display operation 1 | 5/∞ |
Display operation 2 | SYS. POWER ( ) |
+ | + |
— | — |
) or SYS. POWER ( 
) key.2Select a speaker system.1Press the SET UP key such that the subwoofer setting indication (SUBW ON) appears.
| SP |
|
|
| TI.VOL |
|
|
| FM | DIGITAL |
|
| |
|
| A |
| L | C | R |
|
| |||||
|
|
|
|
| MUTE | LFE |
| SW | AM PRO LOGIC S.DIRECT |
|
| ||
|
|
|
|
|
| MHz 3 STEREO MONITOR |
|
| |||||
| RDS |
| EON | PTY | LS | S | RS | kHz DOWN MIX | DSP |
|
|
| |
| TP | TA | NEWS |
|
|
| |||||||
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When you operate on the remote control unit
1Press the display operation 2 [Menu] key repeatedly until “01.IR” appears in the display of the remote control unit.
>01.IR
>02.Surround Home Enter
2Press the 5/∞ keys to select “02.Surround”, then press the display operation 2 [Enter] key.
SetUp
Home Next
2 Use the MULTI CONTROL knob or 5/∞ keys to select the appropriate subwoofer setting.
1 SUBW ON : Subwoofer setting mode to the receiver is ON.
2 SUBW OFF : Subwoofer setting mode to the receiver is OFF.
• The initial setting is “SUBW ON”.
• When “SUBW OFF” is selected, the front speakers are automatically set to “FRNT LRG” and the procedure skips to step 5.
• When subwoofer output sound is required, selected “FRNT NML”.
• The front speakers setting indication (FRNT) appears.
| SP |
|
|
| TI.VOL |
|
|
| FM | DIGITAL |
|
|
|
| A |
| L | C | R |
|
| ||||
|
|
|
|
| MUTE | LFE |
| SW | AM PRO LOGIC S.DIRECT |
|
| |
|
|
|
|
|
| MHz 3 STEREO MONITOR |
|
| ||||
| RDS |
| EON | PTY | LS | S | RS | kHz DOWN MIX | DSP |
|
| |
| TP | TA | NEWS |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
4Use the MULTI CONTROL knob or 5/∞ keys to select the appropriate front speakers setting.
1 FRNT NML (normal) : Average size front speakers are connected to the receiver.
2 FRNT LRG (large) : Large front speakers are connected to the receiver.
•For “FRNT LRG” selection, no sound will be heard from SUBW even when it is set to ON. However, if you select CINEMA EQ. when subwoofer is selected, you will be able to hear sound from the subwoofer.
When in STEREO mode, the sound goes directly to front speaker.
5Press the SET UP or display operation 2 [Next] key to accept the setting.
• The center speaker setting indication (CNTR) appears.
6Use the MULTI CONTROL knob or 5/∞ keys to select the appropriate center speaker setting.
If you selected “LRG” as the front speakers setting,
1 CNTR LRG (large) : A large center speaker is connected to the receiver.
2CNTR NML (normal) : An average size center speaker is connected to the receiver.
3 CNTR OFF | : Center speaker setting mode to the |
| receiver is OFF. |
If you have selected “NML” as the front speakers setting,
1 | CNTR ON : Center speaker setting mode to the receiver |
| is ON. |
2 | CNTR OFF : Center speaker setting mode to the receiver |
| is OFF. |
7Press the SET UP or display operation 2 [Next] key to accept the setting.
• The surround speaker setting indication (SURR) appears.
8Use the MULTI CONTROL knob or 5/∞ keys to select the appropriate surround speaker setting,
If you have selected “LRG” as the center speaker setting,
1 SURR LRG (large) : Large surround speakers are connected to the receiver.
2SURR NML (normal) : Average size surround speakers are connected to the receiver.
3 SURR OFF | : Surround speaker setting mode to |
| the receiver is OFF. |
If you have selected other than “LRG” as the center speaker setting,
1 SURR ON : Surround speaker setting mode to the receiver is ON.
2 SURR OFF : Surround speaker setting mode to the receiver is OFF.
9Press the SET UP or display operation 2 [Next] key to accept the setting.
•The receiver enters the speaker volume level adjustment mode.
•In steps 3 and 4, indications appear only for the selected channels of the speakers that require adjusting.