Surround Play

The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark.

DOLBY DIGITAL can be used when playing DVD or LD software bearing

the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing

video, DVD, or LD software bearing the mark.

SRS Circle Surround enables you to listen to multi channel sound from the stereo source.

INPUT MODE INPUT SELECTOR

LISTEN MODE

+ +

— —

LISTEN M.

Preparations

•Turn ON related components.

•Complete “Preparing for surround sound” (speaker settings). )

•Use the INPUT SELECTOR to select the component you wish to play back with surround sound.

•Use the INPUT MODE key to select the input mode (analog or digital)

for the source you wish to play back.

7

•Noise will be produced when a DTS source is played by selecting the analog input.

1Start playing the video software.2Press the LISTEN MODE (LISTEN M.) key to select the listening mode.

The listening mode settings are stored separately for each input. If the input mode is set to digital auto (“AUTO SOUND” lights), the receiver selects the optimal listening mode automatically based on the type of input signal and the speaker settings.

Each press of the LISTEN MODE (LISTEN M.) key switches the setting as listed below.

The listening mode settings are different depending on the type of input signal.

When the DOLBY DIGITAL signal is input:

(The DOLBY DIGITAL, PRO LOGIC, or 3 STEREO indicator lights up.)

1 DOLBY DIGITAL: DOLBY DIGITAL surround (The DOLBY DIGITAL indicator lights up.)

2PL II MOVIE: PRO LOGIC II surround MOVIE mode (The PRO LOGIC indicator lights up.)

3PL II MUSIC: PRO LOGIC II surround MUSIC mode (The PRO LOGIC indicator lights up.)

4PRO LOGIC: PRO LOGIC II surround PRO LOGIC mode (The PRO LOGIC indicator lights up.)

53 STEREO: 3-STEREO mode (The 3 STEREO indicator lights up.)

6STEREO: Normal stereo playback.

Ambience effects

When you select DOLBY DIGITAL

 

 

 

 

 

29

“DOLBY DIGITAL” will be scrolled from right to left.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SP

A

B

 

TI.VOL L

C

R

FM

AUTO SOUND

DIGITAL

 

AUTO

 

 

AM PRO LOGIC S.DIRECT

 

MEMO

 

CLIP

 

 

 

MUTE

LFE

 

SW

 

 

 

 

 

 

 

 

 

 

 

 

MHz 3 STEREO

MONITOR

 

ST.

 

 

 

RDS

EON

PTY

 

 

 

AUT

 

SL

S

SR

kHz DOWN MIX

DSP

 

 

 

 

TP

TA

NEWS

TUNED

 

 

 

 

 

 

S.DIRECT

MEM

 

 

 

 

 

MUTE

 

 

 

 

 

MONITOR

 

ST.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When the DTS signal is input: (The DTS indicator lights up.)

1 DTS: DTS surround

2 STEREO: Normal stereo playback

When the analog signal or the digital signal (except for DOLBY DIGITAL or DTS signal) is input:

1 PL II MOVIE: PRO LOGIC II surround MOVIE mode (The PRO LOGIC indicator lights up.)

2PL II MUSIC: PRO LOGIC II surround MUSIC mode (The

PRO LOGIC indicator lights up.)

3PRO LOGIC: PRO LOGIC II surround PRO LOGIC mode (The PRO LOGIC indicator lights up.)

43 STEREO: 3-STEREO mode (The 3 STEREO indicator lights up.)

5CIRCLE SURROUND: CS 5.1 surround (The CS 5.1 indi- cator lights up.)

6ARENA: DSP Surround ARENA mode.

7

JAZZ CLUB: DSP Surround JAZZ CLUB mode.

Operations

8

THEATER: DSP Surround THEATER mode.

 

9

STADIUM: DSP Surround STADIUM mode.

 

0

DISCO: DSP Surround DISCO mode.

 

- STEREO: Normal stereo playback. Sound is produced from the two front channels only.

• If Dolby Digital or DTS signal having more channels than the maximum number of playback channels available using the receiver's current settings is input, the DOWNMIX indicator on the front panel lights up and downmixing to match the number of available channels.

3Adjust the volume.

Notes

•Depending on the type of the signal or speaker setting, some listening modes cannot selected.

•When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital.

•To enjoy Dolby Digital surround (as well as all the other listening modes) from a single component, be sure to use Dolby Digital compatible source component's Dolby Digital format digital audio signal to one of the DIGITAL INPUT jacks on the back of the

receiver. Connect the normal audio signal correctly to the respective component's AUDIO jacks. 890@