Connecting the system control
16
Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations.
This unit is compatible only with the
Preparations | If your component has the mode select switch, set the connected |
| |
| components to the [SL16] mode. |
| SYSTEM |
| CONTROL |
| SYSTEM CONTROL |
| cord |
• You may connect the system control cord to either the left or right jack.
EXAMPLE: [SL16] mode connections
The underlined portion represents the setting of the system control mode.
[SL16] | Receiver |
| SYSTEM |
|
|
| |
[SL16] [XS] [XS8] [XR] | Cassette deck |
| CONTROL |
| |||
or MD recorder |
| ||
| cord | ||
|
|
| |
[SL16] [XS] [XS8] | CD player |
|
|
|
| ||
|
|
| |
|
|
|
|
[XS] | Record player |
|
|
|
|
| |
|
|
|
|
•In order to take advantage of the system control operations, the components must be connected to the correct jacks. To use a CD player it must be connected to the CD jacks. To use a cassette deck (or MD recorder) it must be connected to the MD/TAPE jacks. When using more than one CD player (etc.) only the one connected to the specified jacks may be connected for system control.
•Some CD players and cassette decks are not compatible with the [SL16] system control mode. Do not make system connections with equipment that is not [SL16] compatible.
•Some MD players are not system control compatible. You cannot make system control connections to this kind of equipment.
Notes
1.[SL16] equipment cannot be combined with [XR], [XS], and [XS8] equipment for system operations. If your equipment consists of this kind of combination, please do not connect any system control cords. Even without system control cords, normal operations can be carried out without effecting performance.
2.Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment.
3.Be sure the system control plugs are inserted all the way in to the system control terminals.
Do not connect a system control cord to a cassette deck connected to the MONITOR jacks.
Setting up the system
SYSTEM CONTROL OPERATIONSRemote Control
Lets you operate this unit with the system remote supplied with the receiver.
Automatic Operation
When you start playback from a source component, the input selector on this unit switches to that component automatically.
Synchronized Recording
Lets you synchronize recording with the start of playback when recording from CD, MD or analog discs.
Registering setup codes for KENWOOD audio components•If you own remote controllable KENWOOD audio components that are not compatible with system control, registering the setup code en- ables you to control those components using the remote control supplied with this unit (without connecting system control cords). To register setup codes for your remote controllable KENWOOD audio components, see “Registering setup codes for other components”.
‹