46 | Convenient recording methods |
| |
|
|
|
All tracks of one CD or MD are recorded.
Recording is possible to tape or MD from CD and to tape from MD.
For recording to tape, please read “Let's record” in the operation manual of the cassette deck
1Make the preparations for recording.
Preparation section
CD =MD
1Insert a recordable disc into the MD recorder.
2Select “CD” with the input selec- tion key.
3Insert disc(s) in the CD player.
)
MD =TAPE
1Load a tape.
2Select the tape transport direction.
(2 or 3)
3Select “p”.
4Select the Dolby NR mode.
5Select “MD” with the input selec- tion key.
6Insert disc(s) in the MD recorder.
ª
7Adjust the recording level.
CD =TAPE
1Load a tape.
2Select the tape transport direction.
(2 or 3)
3Select “p”.
4Select the Dolby NR mode.
5Select “CD” with the input selec- tion key.
6Insert disc(s) in the CD player.
)
7Adjust the recording level.
section
2Start recording.
CD player and MD recorder must be brought to stopped condition.
Basic
Application section
CD =MD
1Select the target disc.
DISC 1 | DISC 2 | DISC 3 | DISC 4 | DISC 5 | DISC 6 |
2Start recording.
O.T.E.
Press before playback of the CD starts.
MD =TAPE
MDTAPE
Press in stop mode.
CD =TAPE
1Select the target disc.
DISC 1 | DISC 2 | DISC 3 | DISC 4 | DISC 5 | DISC 6 |
2Start recording.
CDTAPE
Press before playback of the CD starts.
sections
| When the O.T.E. key is pressed after playback has | Ö With recording onto tape, the track will be interrupted for the | |
Note | started, only the track being played at that time will be | part of the guide tape at the tape reversal, where recording is | |
recorded. | u | not possible. Please use a different recording method if this is | |
to be avoided.
Knowledge
To interrupt a recording
CD =MD | Goes off |
| |
7 | 6 |
MD =TAPE |
|
7 | 3 |
CD =TAPE | Goes off |
| |
7 | 6 |
ÖRecording and playback will be stopped.
