Electrical
connection
This appliance is manufactured with a frame-
connected, green or bare, ground wire.
Connect the appliance cable to the junction box
through the U.L.-listed conduit connector.
Complete electrical connection according to local
codes and ordinances.
Electrical Shock Hazard
Turn power supply off before connecting
wires.
Electrically ground cooktop.
Failure to follow these instructions could
result in death, fire, or electrical shock.
(Al Where local codes permit connecting
. the frame-ground conductor to the
neutral (white) junction box wire:
cable from power supply
red wires
I I
junction box
twist-on
connectors
1 black wires
cable from . U.L.-listed conduit
appliance connector
Grounded neutral
Figure 1
1. Disconnect the power supply.
2. Connect the flexible armored cable that
extends from the cooktop to the junction box
using a U.L.-listed conduit connector. Tighten
screws on conduit connector.
3. Connect the green (or bare) appliance cable
wire with the neutral wire in the junction box.
4. Connect the two black wires together; then
connect the two red wires together.
(See Figure 1.)
(BI Where local codes Do Not permit
n
connecting the frame-ground
conductor to the neutral (white)
junction box wire:
cable from power supply
red
wires
connector
-lack wires
5-i h/
‘U.L.-listed conduit
cable from connector
appliance
Ungrounded neutral
Figure 2
1. Disconnect the power supply.
2. Connect the flexible armored cable that
extends from the cooktop to the junction box
using a U.L.-listed conduit connector. Tighten
screws on conduit connector.
3. Connect the two black wires together; then
connect the two red wires together.
(See Figure 2.)
4. Connect the green or bare ground wire from
the appliance cable to a grounded wire in the
junction box.
5. Put a twist-on connector on end of white wire.