■Pour 1 qt (0.95 L) of water into the ice bin near the drain and let the ice maker stand for approximately 5 minutes. This will allow the water in the bin to drain into the drain pump so that the pump will remove the remaining water from the ice bin and the drain pump.

■Unplug ice maker or disconnect power.

9.Before using again, clean the ice maker and storage bin.

10.Plug into a grounded 3 prong outlet.

NOTE: All components of the ice maker are permanently lubricated at the factory. They should not require any additional oiling throughout the normal life of the machine.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Ice Maker Operation

WARNING

 

 

Electrical Shock Hazard

 

 

Plug into a grounded 3 prong outlet.

 

 

Do not remove ground prong.

 

 

Do not use an adapter.

 

 

Do not use an extension cord.

 

 

Failure to follow these instructions can result in death,

 

 

fire, or electrical shock.

 

 

 

 

 

 

PROBLEM

RECOMMENDED SOLUTIONS

 

Ice Maker Will Not Operate Check that it is plugged into a grounded 3 prong outlet.

 

Check that the control is turned on. See “Using the Controls.”

 

Replace the fuse or reset the circuit breaker.

 

NOTE: If problems continue, contact an electrician.

 

Room temperature must be above 55°F (13°C). Otherwise, bin thermostat may sense cold room

 

temperature and shut off even though the bin is not full of ice. The ice maker may not restart once it

 

does shut off.

 

If there was a large amount of water added to the ice maker, wait a few minutes for the drain pump to

 

clear. If there is still water in the bin, check to see whether the drain hose is kinked.

 

For models with drain pumps, check that the drain hose is not damaged, or kinked or pinched

 

between cabinet and ice maker. Use only Whirlpool approved drain pump kit, Part Number 1901A.

 

 

Ice Maker Seems Noisy

Is the water in the reservoir overflowing? This is normal. This overflow helps to purge minerals that

 

were removed from the water during the ice making process.

Is there a “whooshing” sound? Check the following things: ■ Check that the water supply is hooked up and turned on.

■ Check that the drain cap is tight and the water drain pan pump is securely attached to the water pan.

Is there ice between the evaporator plate and the cutting grid? Check that the ice maker is level. See “Leveling.” If the ice maker is level, and the problem persists, run a cleaning cycle. See “Cleaning.”

If the ice maker is connected to a water supply pressure in excess of 60 psi, you may hear a loud sound during water filling associated with the flow of water through the inlet valve. Call a licensed, qualified plumber to determine the best method to reduce the supply water pressure (50 psi is recommended).

15

Page 14 Page 16
Page 15
Image 15
KitchenAid W10515677C manual Troubleshooting, Ice Maker Operation, Ice Maker Seems Noisy
Page 14 Page 16

W10515677C specifications

The KitchenAid W10515677C is a versatile and essential component for any home chef who prioritizes both quality and performance in their kitchen tools. This food processor attachment, designed for use with KitchenAid stand mixers, enhances the functionality of the mixer by providing a reliable and efficient method for food preparation.

One of the standout features of the W10515677C is its powerful chopping and slicing capability. With sharp stainless-steel blades, this attachment allows for precise and consistent cuts, whether you're dicing vegetables, grating cheese, or slicing meats. The adjustable slicing disc provides multiple thickness options, making it easy to achieve the desired texture for your ingredients.

The design of the W10515677C is user-friendly, featuring an easy-to-assemble construction that ensures quick setup and minimal hassle. Once attached to the stand mixer, it operates seamlessly, allowing users to focus on their culinary creativity without worrying about the intricacies of food prep.

Another significant characteristic of this attachment is its generous capacity. It can handle large quantities of ingredients, making it perfect for meal preps or when cooking for a crowd. This efficiency saves time and simplifies the cooking process, allowing you to enjoy more time with family and friends.

Safety is also a key consideration in the design of the W10515677C. The attachment features a safety latch that keeps it securely attached to the stand mixer during operation. Additionally, the component comes with a push tool that ensures your hands are kept safely away from the blades while processing food.

Cleaning and maintenance are made straightforward, as most parts of the W10515677C are dishwasher safe, facilitating an easy cleanup after use. This attachment exemplifies KitchenAid’s commitment to durability and quality, built to withstand frequent use in busy kitchens.

In summary, the KitchenAid W10515677C food processor attachment elevates the experience of cooking at home. With its sharp stainless-steel blades, adjustable slicing capabilities, ease of use, and safety features, it stands as a reliable ally in meal preparation. Expanding the capabilities of your KitchenAid stand mixer, this attachment is a practical investment for anyone looking to enhance their culinary skills.
Top Page Image Contents