Chapter 1
Installing the Camera Insert
The printer dock comes with a universal camera insert installed, which is used to fit the camera to the printer dock. The universal insert is used with most cameras.
If your camera comes with a custom insert, use that one instead of the universal insert. Do not discard the universal insert.
1To remove the universal insert:
a Push the insert towards the front of the printer and lift the back edge.
b Push the insert towards the rear of the printer and lift out the front edge.
2To install the custom insert (included with
your camera).
a Place the front tabs on the insert in the slots in the front of the printer dock.
b Fit the back of the insert down into the dock and snap the insert into place.
4
