Kodak 4000 manual There are too many

Chapter 6

Printing

Problem	Cause	Action/Solution
Nothing happens	There are too many	1	Disconnect the USB cable from
when you try to	applications running		the printer dock (page 25).
print...from the	on your computer.	2	Close all software applications.
computer		3	Reconnect the USB cable
(cont).
			(page 25) to the printer dock.
	Some Advanced Power	See the power management section
	Management utilities	of your laptop user’s guide to
	on laptops turn off	disable this feature.
	ports to save battery
	life.
	The software is not	1	Disconnect the USB cable from
	fully or properly		the printer dock.
	installed on the	2	Close all software applications.
	computer.	3	Uninstall the software
			(page 21).
		4	Re-install the Kodak EasyShare
			printer dock 4000 software
			(page 21).
		5	Reconnect the USB cable to the
			printer dock (page 25).
	Computer is not	Consider upgrading your computer
	running efficiently.	to meet the recommended system
		requirements (page 19).
	The 0perating system	1	Disconnect the printer dock
	does not recognize the		from the computer.
	printer dock 4000	2	Re-install printer drivers.
		3	Connect the printer dock to the
			computer, and try again.

42