Kodak 6800 manual Supply spool Bar code Lugs Notches Thumb wheel

Setting Up the Printer

Supply spool

Bar code

Lugs Notches

Thumb wheel

4.Push the bar code end of the supply spool into the spool holder on the right.

5.Place the left side of the supply spool into the spool holder on the left.

6.Rotate the thumb wheel until the lugs on the spool holder lock into the notches on the supply spool.

7.Remove the label and wrapper from the ribbon.

Label

Take-up spool

8.Push the right side of the take-up spool into the spool holder on the right.

9.Place the left side of the take-up spool into the spool holder on the left.

10.Adjust the take-up spool until the lugs on the spool holder lock into the notches on take-up spool.

11.If there is any slack in the ribbon, remove it by turning the supply spool.

IMPORTANT: Slack in the ribbon can cause a paper jam when making prints.

1-6