Calibrating the Printer
14.Check that the printer setup listed is the printer setup you want to use for calibration.
•If the printer setup listed is the correct printer setup for your printer, go to Step 19.
•If you want a different printer setup than what is listed, continue with Step 15.
15.Click Change Setup.
The following dialog box appears.
NOTE: The appearance of this dialog box may vary, depending on your printer export module.
16.Click Select to change the media file for your printer. A file selection dialog box appears.
17.Select the media file and then click OK.
18.Click OK to close the dialog box.
19.Click Next.
The following dialog box appears.
