Maintaining the Printer

Peel roller

4. Use another clean alcohol pad to wipe the peel roller. Rotate

the peel roller while wiping to clean all of the roller surface.

 

5. Allow the alcohol to dry completely (about five minutes) before you resume printing.

6. Close the top cover.

Cleaning the Platen Roller 1. Make sure the power switch is turned off (). 2. Carefully open the top cover.

CAUTION:

The thermal head becomes extremely hot during normal operation. Do not touch it.

There are sharp cutter blades inside the printer. Follow instructions carefully to avoid touching any areas that may be hazardous.

3. Remove an alcohol pad from its packaging. Wipe the rubber section of the platen roller with the pad.

4. Rotate the roller to clean the entire surface.

5. Allow the alcohol to dry completely (about five minutes) before you resume printing.

6. Close the top cover.

Platen Roller

3-3

Page 21
Image 21
Kodak 8810 manual Peel roller while wiping to clean all of the roller surface