Appendix B: Safety and Regulatory Information
Important Safety Information
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified in this manual may result in injury and/or damage to the printer.
•The power outlet should be easily accessible and installed near the printer.
•Position the power cable so that it cannot be pulled on or tripped over.
•Never allow the power cable to contact hot surfaces.
•The power outlet must be grounded. An ungrounded outlet can cause fire, electric shock, or harmful interference to nearby electrical devices.
•Use only the power cable provided with the printer.
•Do not operate the printer with a damaged power cable.
•Always unplug the power cable from the printer before cleaning or when the printer is not in use.
•If the printer has been dropped or damaged, make sure a qualified service person examines the printer before you use it.
•Do not block the filter openings on the printer cabinet.
•Do not expose the printer to moisture or water.
•Do not allow any foreign objects or liquids to fall or spill inside the printer. Fire or electric shock could result.
•The thermal print head becomes extremely hot during normal operation. Do not touch it.
•Alcohol pads are used to clean the thermal print head and other internal printer components. In the United States, for health, safety, and environment information, call
