Maintaining the Printer | Kodak 8810 specs

Maintaining the Printer

6.Repeat steps 1-3 to remove, clean and reinstall the front cleaning roller.

CAUTION:

The thermal head becomes extremely hot during normal operation. Do not touch it.

There are sharp cutter blades inside the printer. Follow instructions carefully to avoid touching any areas that may be hazardous.

7.Allow the alcohol to dry completely (about five minutes) before you resume printing.

8.Close the top cover.

3-5

Image 23

Kodak 8810 manual Maintaining the Printer

Contents

Photo Printer Page Table of Contents Electromagnetic Compatibility EMC Package Contents Setting Up the Printer Preparing the Printer for Use Turning On the Printer Connecting the Power CableConnecting the USB Cable Loading the Ribbon Handling and Storing the Paper and Ribbon Label Loading the Paper Remove the label from the paper roll Gently close the paper door Making a Test Print Page Operator Panel Lights Operating the PrinterMaking Prints Handling and Storing Prints Button Use Operator Panel Buttons Display Description Printer SettingsPage Maintaining the Printer Performing Routine Maintenance Cleaning the Thermal Print Head and the Peel Roller Cleaning the Exterior Peel roller while wiping to clean all of the roller surface Cleaning the Cleaning Rollers Maintaining the Printer Page Problem Description or Cause Possible Solution Troubleshooting Message Description or Cause Possible Solution Resolving Operator Panel Status/Error Messages Clearing a Paper Jam Recovering from a Power Interruption System Requirements Printer SpecificationsAppendix a Additional Information Printer Supplies Thermal Printer Cleaning KitKodak Thermal Printer Cleaning Kit Getting Help Packing and Transporting the PrinterPage Important Safety Information Appendix B Safety and Regulatory Information Safety Labels Safety Regulatory and Safety Compliance Safety and Regulatory Information Noise Emission Disposal China RoHS