Kohler 38RCL, 48RCL, 60RCL manual Programmable Interface Module PIM Menus

3.18Programmable Interface Module (PIM) Menus

The PIM status menu displays the status of inputs and outputs connected to the programmable interface module (PIM). This is a status display menu only. Input and output settings cannot be changed from the RDC2 controller’s user interface.

Apersonal computer running Kohlerr SiteTecht software is required to change the input and output settings. Contact an authorized distributor or dealer for service.

The Kohlerr OnCuer Home Management System can be used to turn outputs on and off. See the OnCue Software Operation Manual for instructions.

PIM	PIM 1	---->
Status:
	<---- Return

Input 1

In/Active

Input 2

In/Active

Output 1:

In/Active

Output 2:

In/Active

Output 3:

In/Active

Output 4:

In/Active

Output 5:

In/Active

Output 6:

In/Active

<---- Return

tp6810

Figure 3-22Programmable Interface Module (PIM) Status Menu

TP-6810 11/13 Section 3 RDC2 Controller Operation 45