Kohler 60RCL, 38RCL, 48RCL manual Generator Set Information Menu, Genset Run Time Menu

3.11Generator Set Information Menu

The generator set model number and serial numbers are displayed. No changes are allowed from this menu.

Model and serial numbers are factory set and should not require changes in the field, except in the event that the controller is being replaced. A personal computer running Kohlerr SiteTecht software is required to enter the generator set model number and serial numbers on a replacement controller. Contact an authorized Kohler distributor/dealer for service.

Genset ---->	Genset M/N:
Information	48RCL
	Genset S/N:
	########
	or
	Controller S/N:
	########
	<---- Return
	tp6810

Figure 3-11Generator Set Information Menu

3.12 Genset Run Time Menu

The data shown in Figure 3-12 are displayed. No changes are allowed from this menu.

The Next Maintenance menu shows the number of hours of generator set operation until maintenance is required. The estimated date for the next scheduled maintenance is also displayed. The maintenance reminder intervals are based on the engine manufacturer’s recommendation for changing the oil. Refer to Section 4, Scheduled Maintenance, for maintenance instructions.

After changing the oil and performing other recommended maintenance, go to the Overview menu to reset the maintenance timer. See Section 4.3.4 for instructions to reset the maintenance timer.

Genset ---->	Eng Runtime:
Run Time	27.4 h
	Eng Starts:
	40
	Next Maintenance:
	150 h or Mar2012
	<---- Return
	tp6810

Figure 3-12Generator Set Run Time Menu

TP-6810 11/13 Section 3 RDC2 Controller Operation 35