For Wall Supply Installations Only
For Through-
Tape
Flange Centerlines
Flange
Template
Screw Hole
Center the toilet on the template.
Top View
2. Prepare the Installation Location
IMPORTANT! Risk of product damage. If
If there are
Cut out the inside of the flange area on the template.
Position the template with the hole positioned over the flange. It is critical that the centerlines marked on the template are centered on the flange.
Secure the template to the floor with tape.
IMPORTANT! Because of the unique design of this toilet, the width of the bottom edges of the toilet will vary. The following steps are required because of this variation.
Confirm the template is correctly positioned and centered over the flange.
Position the toilet on the template. Make sure the front of the base of the toilet is aligned with the markings on the template.
Position the toilet so an equal amount of shaded area is visible on each side of the template.
Confirm the toilet is centered by measuring the amount of space on each side of the template.
Directly under the screw holes on each side of the toilet, accurately mark the bottom edge of the base. The mark should intersect the lines labeled ″C″ and ″A″ or ″B″ on each side of the template.
12 | Kohler Co. |